Every SmartJack integrated Drive and POC has the ability to add a communication protocol card like ModBus RTU, Ethernet ModBus TCP, and others. The parameters in the beam pump drive and pump off controller software are read & write values. With our leading edge technology and powerful processing, SmartJackTM drives even have the capability to run two communication protocols at the same time.
So what does that mean to the production manager, pumper or field foreman? Your critical decision makers will have the ability to remotely monitor and/or change settings in the drive and pump off controller. You can make changes via Telemetry systems (Radio, dial up, satellite or internet) with the proper security clearance.
Unlike traditional pump off controllers on the market, the SmartJack Drive/POC software does not require a separate radio system to access the pump off data. So, if you have an existing telemetry system in place and can communicate ModBus RTU, you can access all the data. If you need to increase or decrease pump speed, or if you want to change the time settings on pump off conditions, the flexibility is available by installing a ModBus RTU communication card in the drive.
Global Oil Flow USA, LLC. can supply the radio, the flow computer, or just the communication card to allow easy communication with your existing telemetry system. For more details on communications with our drives please contact our local representative.